Full-automatic Plastic Cup Thermoforming & Stacking Machine produces cups and stacking cups at same time. This thermoforming machine with four pillars, make different kinds of plastic cups, and stack different kinds of cups, mainly stack cups with small sizes, like jelly cups, yoghurt cups which upper diameter is bigger than depth of cups. Suitable material: PP, PS, PET, PE, PVC, HIPS. Forming area: L650mm x W280mm x D120mm Sheet thickness range: 0.4mm - 1.8mm Speed range: 22-30times/min Rated power: 80kw Actual power: 55kw Pressure supply: 07-075mpa Water recycle supply: 05m3/min Sheet width: within 650mm Sheet diameter: within 600mm Servo motor for sheet feeding: 3kw Servo motor for streching: 3kw Oil pump of motor: 15kw Rewind motor: 0.5kw Load roll motor: 0.75kw Production Capacity: Cup with dia. 63mm, speed is 26-30 times/min,cup mould has21 cavities, so onehour produces 32,760– 37,800PCs of cups. Main functions as following: 1.PLC and touch screen control the operation of machine 2.Two pillars fix mould. 3. PID temperature controllers control temperature. 4. Servo motor include Drive controls sheet feeding. 5. Servo motor include drive controls upper mold (stretching). 6. Hydraulic pressure system controls down mold. 7. Automatically lubricate oil when machine works. 8. Oven system (Infrared Radiation ceramic heaters) moves outside when electricity went off. 9. Automatic load for sheet roll. 9. Adjusttracks (orbits) by motor, not by worker. 10. Rewinder forwaste material on the top of machine. 13. Stable operation and reliable performance, low noise, high quality.